EVO-10STF includes oil filter motor plate and starter

EVO-10STF EVO-10S W/ STARTER & OIL FILTER

0 Review(s) Write a Review

Your Price: $3,005.00

EVO-10S W/ STARTER & OIL FILTER

Part Number: EVO-10STF

Availability: In Stock

Quantity

Description
Kit Breakdown
Rear Basket Breakdown
Hub Breakdown
Front Pulley and Insert Breakdown

BDL's EVO-10STF is the work horse of belt drives. With over 50,000 kits running on bikes today you can be reassured this drive can outlast and out perform the competition. Our one-piece 6061-T6 polished billet motor plate locks the trans and engine together. All of these kits include a 3" wide belt drive unit with polished pressure plate, double row sealed mainshaft bearing, polished aluminum side plate and pulley covers and a complete "BDL Clutch" with Kevlar® plates. This kit will accommodate the oil filter in the center of the plate, the side guard can still be used without interference. NOTE: Kit comes with 1/4" insert for stock applications. For installation in wide frame/ tire applications, choose the appropriate insert. For Shovelhead® Models from 1970 to 1978.

	DESCRIPTION	BDL PART NO.
A	Rear Basket (breakdown below)	76-3E
B	47 Tooth Front Pulley (breakdown below)	47S-3
C	3” HTD Rubber Belt	BDL-37144-3
D	Taper Hub 1970-78	EV-190
E	Complete Clutch Kit (includes fibers and steels)	ERCPS-100
F	Spring Pressure Plate	EPP-100
I	Shoulder Bolts Set of 6	ESB-100
J	Replacement Coil Springs set of 6	ECS-100
L	Hardware Kit for EVO-10S	HK-10
M	Shovelhead Motor Plate W/ Oil Filter Relocation Kit	BDL-1000-F
MB	Motor Plate Bearing	MPB-10
N	Starter Housing	SH-10
O	Side Plate	SP-10
P	Dome covers	MD-200
Q	Starter Pinion Gear for Shovelhead Models	PG-200
R	Oil Filter (Fram Filter PH6022)	N/A
S	All Balls Starter	STR-100

	DESCRIPTION	BDL PART NO.
A	Rear Basket (includes all parts below when ordering 76-3E)	76-3E
A1	Starter Ring Gear	SG-2
A2	Drive Dogs (set of 12)	EVRD-1
A3	Hub Bearing	EHB-100
A4	C-Clip for Hub Bearing	CC-244

	DESCRIPTION	BDL PART NO.
D	Shallow Taper Hub 1979-84	EV-190
D1	C-Clip for Backside of Hub	CC-158

	DESCRIPTION	BDL PART NO.
B	Front Pulley 47 Tooth 3”	47S-3
B1	1/4" Insert and Nut (nut not shown)	IN-250